@article { author = {Seifi Najmi, E. and Ajami, A. and Rajaei, A. H.}, title = {A Generalized Modular Multilevel Current Source Inverter}, journal = {Journal of Operation and Automation in Power Engineering}, volume = {5}, number = {2}, pages = {181-190}, year = {2017}, publisher = {University of Mohaghegh Ardabili}, issn = {2322-4576}, eissn = {2423-4567}, doi = {10.22098/joape.2017.3080.1254}, abstract = {This paper proposes a novel topology of multilevel current source inverter which is suitable to apply in low/medium voltage. The proposed topology is capable of producing desirable bidirectional output current levels. Furthermore, it can employ symmetrical DC current sources as well as asymmetrical ones which is a significant advantage. Asymmetrical mode makes it possible to generate a great number of output levels by appropriate selection of DC current source magnitude, needless to make changes in the hardware of the inverter. As a result, various methods are presented to compute the magnitude of needed DC current sources. In comparison to the conventional H-Bridge inverter (CHB), the proposed inverter has lessened the number of required DC current sources, switches as well as related gate driver circuits. The reduced number of required components has leads to cost and volume advantages. In addition, the control layout has become simpler. Reduction of power loss as a result of reduced number of on-state switches is the other merit of the proposed inverter. To evaluate the efficiency of the proposed inverter, its simulation and experimental results are extracted including results of various methods of determining DC current source magnitude.}, keywords = {Multilevel Current Source Inverters,Symmetric Inverter,Asymmetric Inverter,Reduced Number of Circuit Devices,Power Loss}, title_fa = {اینورتر جامع منبع جریان چند سطحی ماژولار}, abstract_fa = {در این مقاله، ساختار جدیدی برای اینورتر چند سطحی منبع جریان ارائه شده است که مناسب برای استفاده در ولتاژ پایین/متوسط می­باشد. ساختار ارائه شده قادر است سطوح جریان دلخواه را در خروجی ایجاد نماید. همچنین، از مزایای ساختار پیشنهادی، قابلیت استفاده از منابع جریان DC متقارن یا نامتقارن می­باشد. در حالت نامتقارن می­توان با انتخاب مناسب اندازه منابع ورودی، سطوح بیشتری در خروجی ایجاد کرد بدون آنکه ساختار مدار دچار تغییر شود. در نتیجه، در این مقاله چند روش برای محاسبه اندازه منابع جریان DC ورودی در حالت نامتقارن ارائه شده است. اینورتر پیشنهادی در مقایسه با اینورتر پل H (CHB)، دارای منابع جریان DC و کلیدهای نیمه هادی کمتری بوده و در نتیجه تعداد مدارات راه انداز نیز کاهش می یابد. استفاده از تعداد عناصر کمتر هم سبب کاهش هزینه و حجم مدار می گردد و هم سیستم کنترلی ساده تری را مورد نیاز خواهد بود. ویژگی دیگر ساختار ارائه شده، کاهش تلفات بدلیل کاهش تعداد کلیدهای در حالت روشن در هر لحظه می­باشد. برای ارزیابی عملکرد ساختار پیشنهادی، شبیه سازی و نتایج عملی برای حالت های مختلف ارائه شده که نتایج صحت عملکرد ساختار پیشنهادی را نشان می­دهند.}, keywords_fa = {اینورتر منبع جریان,اینورتر متقارن,اینورتر نامتقارن,کاهش تلفات اینورتر}, url = {https://joape.uma.ac.ir/article_596.html}, eprint = {https://joape.uma.ac.ir/article_596_1e164ca840cc111b3bd2029a263ed9de.pdf} }