@article { author = {Moayedirad, H. and Shamsi Nejad, M. A.}, title = {Increasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds}, journal = {Journal of Operation and Automation in Power Engineering}, volume = {6}, number = {1}, pages = {23-39}, year = {2018}, publisher = {University of Mohaghegh Ardabili}, issn = {2322-4576}, eissn = {2423-4567}, doi = {10.22098/joape.2018.2990.1249}, abstract = {A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the ratio of the number of poles. In the vector control method at low speeds, flux is difficult to estimate because the voltage drop on the stator resistance is comparable with the input stator voltage, disturbing the performance of the motor drive. To solve the abovementioned problem, researchers have benefited from the free capacity of the two windings of the stator. This makes the motor deviate from its standard operating mode at low speeds. The main purpose of this paper is reducing the power losses of the inverter unit in the DSWIM drive at low speeds via the proposed control method and a five-leg inverter. This paper deals with two topics: 1. Using the idea of rotor flux compensation at low speeds, the motor works in its standard operating mode. Therefore, the power losses of the utilized power electronic converters are also reduced to a considerable extent; and 2. Reduction in capital cost can be achieved by utilizing a five-leg power electronic converter. The proposed methods are simulated in MATLAB/Simulink software, and the results of simulation confirm the assumptions.}, keywords = {Dual stator winding,five-leg inverter,induction machine,low speed,vector control}, title_fa = {افزایش بهره وری مبدل الکترونیک قدرت در درایو موتور القایی قفس سنجابی دو سیم پیچه پیشنهادی با استفاده از اینورتر پنج ستونه در سرعت های پایین}, abstract_fa = {یک موتور القایی قفس سنجابی دو سیم­پیچه، یک موتور القایی تک قابه­ی بدون جاروبک است که دارای یک استاتور با دو سیم­پیچ سه فاز ایزوله است که تعداد قطب­های آن نابرابرند. هر سیم­پیچ استاتور توسط یک اینورتر سه فاز مستقل تغذیه می­شود. بهره­وری مناسب این موتور وقتی حاصل می­شود که نسبت دو فرکانس تغذیه کننده­ی ماشین، برابر با نسبت تعداد قطب­ها باشد. در روش کنترل برداری بدلیل قابل ملاحظه بودن افت ولتاژ برروی مقاومت استاتور در مقابل ولتاژ استاتور ورودی، تخمین شار روتور در سرعت­های پایین سخت است که باعث می­شود عملکرد درایو موتور خراب شود. محققین برای حل مشکل فوق از ظرفیت آزاد دو سیم­پیچ استاتور بهره برده­اند که این باعث می­شود که موتور در سرعت­های پایین از مد عملکردی استانداردش خارج شود. هدف اصلی این مقاله کاهش تلفات توان واحد اینورتر در درایو موتور القایی قفس سنجابی دو سیم­پیچه در سرعت­های پایین می­باشد که این مهم توسط روش کنترلی پیشنهادی و یک اینورتر پنج ستونه حاصل می­شود. این مقاله به دو موضوع می پردازد: 1- استفاده از ایده­ی جبران کننده­ی شار روتور در سرعت­های پایین باعث می­شود موتور در مد عملکردی استاندادرش کار کند. لذا تلفات توان در مبدل­های الکترونیک قدرت استفاده شده به مقدار قابل توجه­ای کاهش می­یابد؛ 2- هزینه­ها با استفاده از یک مبدل الکترونی قدرت پنج ستونه کاهش می­یابد. روش­های پیشنهادی در محیط سیمولینک نرم افزار متلب شبیه­سازی شده­اند و روش­های پیشنهادی مؤید ادعاهای ارائه شده می­باشند.}, keywords_fa = {دو سیم‌پیچه,اینورتر پنج ستونه,ماشین القایی,سرعت پایین,کنترل برداری}, url = {https://joape.uma.ac.ir/article_634.html}, eprint = {https://joape.uma.ac.ir/article_634_bea20854ea2da190bf8e2ff84b7db704.pdf} }