@article { author = {Seifi, E. and Rajaei, A. and Zare, S. and Nabinejad, A. and Nobahar, S.}, title = {A Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application}, journal = {Journal of Operation and Automation in Power Engineering}, volume = {6}, number = {2}, pages = {193-207}, year = {2018}, publisher = {University of Mohaghegh Ardabili}, issn = {2322-4576}, eissn = {2423-4567}, doi = {10.22098/joape.2006.3753.1295}, abstract = {This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains a bidirectional power flow port to charge/discharge an energy storage system (battery). In addition to multi-port structure, high boost value of voltage gain is the other merit of the converter. Hybrid system is composed of fuel cell (FC), photovoltaic (PV) panels and a battery pack. Different operating states are discussed, and a control system based on decoupling networks is presented. The control system is able to seek and extract maximum power of PV panel, adjust generated power of FC, and handle charging and discharging modes of battery. In order to control operating modes of the proposed converter, a power management method is also presented. By the way, small signal model is presented for the converter.The bode diagram has been plotted from the small signal model. Then the controller it was designed from the bode diagram. The results of simulation by the PI controller are presented. Also, the simulation results by P&O algorithm for the converter has been evaluated. Several Simulation and experimental tests have been carried out to evaluate the analysis and feasibility of the aforementioned system. The results verify well performance of the converter and confirm the simulations and theoretical results.}, keywords = {Hybrid renewable energy,Photovoltaic,Fuel cell,DC/DC Converter,multiport converters}, title_fa = {یک مبدل DC/DC افزاینده چند دریچه ای برای کاربرد انرژی نو هایبرید}, abstract_fa = {این مقاله یک مبدل جدید DC/DC چند دریچه ای را که مناسب برای ارتباط در سیستم های انرژی نو هایبریدی را ارائه می دهد. مبدل شامل سه دریچه با پخش توان یک طرفه است که دو تای آنها به عنوان ورودی دریچه می باشند و متصل به دو منبع انرژی مستقل در حالی که سومین برابر با دریچه خروجی استکه یک بار مستقل را تغذیه می کند. به علاوه، مبدل پیشنهادی شامل یک دریچه پخش توان دو طرفه برای شارژ و تخلیه منبع انرژی ذخیره ساز (باتری) به کار گرفته می شود. اضافه بر ساختار چند دریچه ای، بهره ولتاژ با مقدار بالا نیز دیگر مزیت مبدل به حساب می آید. سیستم هایبرید شامل پیل سوختی، پنل های خورشیدی و یک مجموعه از باتری می باشد. وضعیت های عملکردی متفاوت مورد مطالعه قرار گرفته و یک سیستم کنترلی بر مینای شبکه های مجزا ارائه شده است. سیستم کنترلی قادر به جستجو و استخراج بیشترین توان از پنل های خورشیدی ، تنظیم توان تولیدی پیل سوختی و حالت های شارژ و تخلیه باتری می باشد. به منظور کنترل حالت های کاری از مبدل پیشنهاد شده، یک روش تنظیم مدیریت توان نیز بیان شده است. در ضمن، مدل سیگنال کوچک برای مبدل ارائه شده است. و دیاگرام بود آن رسم شده است و به کمک آن کنترلر ولتاژ خروجی طراحی شده است. شبیه سازی و نتایج آزمایشگاهی برای ارزیابی تحلیل و امکان سنجی سیسنم ذکر شده به کار گرفته شده است. نتایج عملکرد صحیح مبدل را تایید می کند و شبیه سازی و نتایج تئوری را تصدیق می کند.}, keywords_fa = {انرژی نو هایبریدی,فتو ولتائیک,پیل سوختی,مبدل DC/DC,مبدل چند ورودی چند خروجی}, url = {https://joape.uma.ac.ir/article_717.html}, eprint = {https://joape.uma.ac.ir/article_717_1dd2c5b49665ae197691cf696b300663.pdf} }