[1] S. M. Alizadeh Shabestary, M. Saeedmanesh, A. Rahimi Kian, and E. Jalalabadi, “Real-time frequency and voltage control of an islanded mode microgrid,”J. Iran. Assoc. Electr. Electron. Eng., vol. 12, no. 3, pp. 9-14, 2015.
[2] E. Salary, M. R. Banaei, A. Ajami, “Design of novel step-up boost dc/dc converter, “Iran. J. Sci. Technol. Trans. Electr. Eng., vol. 41pp.13-22, 2017.
[3] E. Salary, M. R. Banaei, A. Ajami, “Step-up DC/DC converter based on partial power processing, “Gazi Univ. J. Sci., vol. 28, no. 4, pp.599-607, 2015.
[4] E. Salary, M. R. Banaei, A. Ajami, “Multi-stage DC-AC converter based on new DC-DC converter for energy conversion,” J. Oper. Autom. Power Eng., vol. 4, pp. 42-53, 2016.
[5] A. Asghar Ghadimi, H. Rastegar, and A. Keyhani, “Development of average model for control of a full bridge PWM DC-DC converter,” J. Iran. Assoc. Electr. Electron. Eng., vol. 4, no. 2, pp. 52-59, 2007.
[6] W. Li, and X. He, “Review of nonisolated high-step-up dc/dc converters in photovoltaic grid-connected applications,” IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1239-1250, 2011.
[7] K. Shu-Kong, and D. D. C.Lu, “A high step-down transformerless single-stage single-switch AC/DC converter,” IEEE Trans. Power Electron., vol. 28, no. 4, pp. 36-45, 2013.
[8] E. H. Ismail, M. A. Al-Saffar, and A. J. Sabzali, “High conversion ratio DC–DC converters with reduced switch stress,” IEEE Trans. Circuits Syst. I, vol. 55, no. 7, pp. 2139- 2151, 2008.
[9] Y. Jang, and M. M. Jovanovic, “Interleaved boost converter with intrinsic voltage-doubler characteristic for universal-line PFC front end”, IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1394 - 1401, 2007.
[10] F. S. Garcia, J. A. Pomilio, and G. Spiazzi, “Modeling and control design of the six-phase interleaved double dual boost”,
Proc. 9th IEEE Int. Conf. Ind. Appl. , 2010, pp. 1-6.
[11] S. Choi, V. G. Agelidis, J. Yang, D. Coutellier, and P. Marabeas, “Analysis, design and experimental results of a floating-output interleaved-input boost-derived dc–dc high-gain transformer-less converter,” IET Power Electron., vol. 4, no. 1, pp. 168-180, 2011.
[12] F. S. Garcia, J. A. Pomilio, and G. Spiazzi, “Modeling and control design of the interleaved double dual boost converter,” IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3283-3290, 2013.
[14] Y. Zhang, and and J. Liu, “Improved pulse-width modulation of diode-assisted buck-boost voltage source inverter,” IEEE Trans. Power Electron., vol. 28, no. 8, pp. 3675-3699, 2013.
[15] K.I. Hwu, and W.Z. Jiang, “Voltage gain enhancement for a step-up converter constructed by KY and buck-boost converters,” IEEE Trans. Ind. Electron., vol. 61, no. 4, pp. 1758-1768, 2014.
[16] M. R. Banaei, H. Ardi, and A. Farakhor, “Analysis and implementation of a new single-switch buck–boost DC/DC converter,” IET Power Electron., vol. 7, no. 7, pp.1906-1914, 2014.
[17] M. El-Sayed Ahmed, and M. Orabi, O. M. AbdelRahim, “Two-stage micro-grid inverter with high-voltage gain for photovoltaic applications,” IET Power Electron., vol. 6, no. 9, pp. 1812-1821, 2013.
[18] V. Yaramasu, B. Wu, M. Rivera, and J. Rodriguez, “A new power conversion system for megawatt PMSG wind turbines using four-level converters and a simple control scheme based on two-step model predictive strategy—part i: modeling and theoretical analysis,” IEEE J. Emerging Sel. Top. Power Electron., vol. 2, no. 1, pp. 3-13, 2014.
[19] S. Krithiga, and N. Ammasai Gounden, “Investigations of an improved PV system topology using multilevel boost converter and line commutated inverter with solutions to grid issues,” Simul. Modell. Pract. Theory, 2014, 42, pp. 147-159.
[20] M. F. Kangarlu, and E. Babaei, “A generalized cascaded multilevel inverter using series connection of submultilevel inverters,” IEEE Trans. Power Electron., vol. 28, no. 2, pp. 625-636, Feb. 2013.
[21]M. R. Banaei, E. Salary, “Application of multi-stage converter in distributed generation systems,” Energy Convers. Manage., vol. 62, pp. 76-83, 2012.
)