[1] M. S. Manoharan, A. Ahmed, J.-W. Seo and J.-H. Park, “Power conditioning for a small-scale PV system with charge-balancing integrated micro-inverter,” J. Power Electron., vol. 15, no. 5, pp. 1318-1328, 2015.
[2] H. W. Ping, N. A. Rahim and J. Jamaludin, “New three-phase multilevel inverter with shared power switches,” J. Power Electron., vol. 13, no. 5, pp. 787-797, 2013.
[3] M. Moradzadeh, S. Hamkari E. Zamiri, and R. Barzegarkhoo, “Novel high step-up DC/DC converter structure using a coupled inductor with minimal voltage stress on the main switch,” J. Power Electron., vol. 16, no. 6, pp. 2005-2015, 2016.
[4] N. Mohan, W. Robbins and T. Undeland, “Power electronics: converters, applications, and design,” 2003.
[5] R. W. Erickson and D. Maksimovic, Fundam. Power Electron., Springer, 2001.
[6] C. Yaow-Ming, L. Yuan-Chuan and W. Feng-Yu, “Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications,” Ind. Appl. IEEE Trans., vol. 38, no. 4, pp. 1096-1104, 2002.
[7] L. Cao, K. H. Loo, Y. M. Lai, C. K. Tse and Y. Yang, “A multi-input bi-directional converter with decoupled power distribution control,” Proc. 38th Annu. Conf. IEEE Ind. Electron. Soc., 2012, pp. 3346-3351.
[8] M. M. Amin and O. A. Mohammed, “A novel grid-connected multi-input boost converter for HEVs: Design and implementation,” Proc. IEEE Int. Conf. Electr. Veh., 2012, pp. 1-7.
[9] Z. Rehman, “Multiport power electronics circuitry for integration of renewable energy sources in low power applications: a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Electrical Engineering at Massey University, Palmerston North, New Zealand.” Massey University, 2017.
[10] S. Xiaofeng, P. Guangming, Y. Shuai and C. Zhe, “A novel multi-port DC/DC converter with bi-directional storage unit,” Proc. 7th Int. Conf. Power Electron. Motion Control, 2012, vol. 3, pp. 1771-1775.
[11] A. Khaligh, C. Jian and L. Young-Joo, “A multiple-input DC-DC converter topology,” IEEE Trans Power Electron., vol. 24, no. 3, pp. 862-868, 2009.
[12] H. Matsuo, T. Shigemizu, F. Kurokawa and N. Watanabe, “Characteristics of the multiple-input DC-DC converter,” Proc. IEEE 24th Annu. Power Electron. Spec. Conf., 1993, pp. 115-120.
[13] W. Hongfei, S. Kai, D. Shun and X. Yan, “Topology derivation of nonisolated three-port DC-DC converters from DIC and DOC,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3297-3307, 2013.
[14] R. Jie, L. Fuxin, R. Xinbo, Y. Dongsheng, L. Yan and J. Ke, “Isolated multiple-input DC/DC converter using alternative pulsating source as building cells,” Proc. Int. Power Electron. Conf., 2010, pp. 1463-1470.
[15] Z. Qian, O. Abdel-Rahman and I. Batarseh, “An integrated four-port DC/DC converter for renewable energy applications,” IEEE Trans. Power Electron., vol. 25, no. 7, pp. 1877-1887, 2010.
[16] B. Mangu, S. Akshatha, D. Suryanarayana and B. G. Fernandes, “Grid-connected PV-wind-battery-based multi-input transformer-coupled bidirectional DC-DC converter for household applications,” IEEE J. Emerg. Sel. Top. Power Electron., vol. 4, no. 3, pp. 1086-1095, Sep. 2016.
)