[1] B. Kjaer, K. Pedersen, and F. Blaabjerg, “A review of singlephase grid-connected inverters for photovoltaic modules”, IEEE Trans. Ind. Electron., vol. 41, no. 5, pp. 1292-1306, 2005.
[2] D. Meneses, F. Blaabjery, O. Garcia, J. A. Cobos, “Review and comparison of step-up transformerless topologies for photovoltaic AC-module application”, IEEE Trans. Power Electron., vol. 28, no. 6, pp. 2649-2663, 2013.
[3] H. S. Lee, H. J. Choe, S. H. Ham and B. Kang, “High-efficiency asymmetric forward-flyback converter for wide output power range”, IEEE Trans. Power Electron., vol. 32, no. 1, pp. 433-440, 2017.
[4] N. Mohan, T. M. Undeland and W. P. Robbins, “Power Electronis: converters applications and design”, New York: John Wiley & Sons, 1995.
[5] S. K. Changchien, T. J. Liang, J. F. Chen and L. S. Yang, “Step-up DC-DC converter by coupled inductor and voltage-lift technique”, IET Power Electron., vol. 3, no. 3, pp. 369-378, 2010.
[6] W. Li and X. He, “Review of nonisolated high-step-up DC/DC converters in photovoltaic grid-connected applications”, IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1239-1250, 2011.
[7] M. Nymand and M. A. Andersen, “High-efficiency isolated boost DC–DC converter for high-power low-voltage fuel-cell applications”, IEEE Trans. Ind. Electron., vol. 589, no. 2, pp. 505-514, 2010.
[8] F. L. Tofoli, D. C. Pereira, W. J. Paula and D. S. Junior, “Survey on non-isolated high-voltage step-up DC–DC topologies based on the boost converter”, IET Power Electron., vol. 8, no. 8, pp. 2044-2057, 2015.
[9] X. Zhu, B. Zhang, Z. Li, H. Li and L. Ran, “Extended switched-boost DC-DC converters adopting switched-capacitor/switched-inductor cells for high step-up conversion”,IEEE J. Emerg. Sel. Topics Power Electron., vol. 5, no. 3, pp. 1020-1030, 2017.
[10] L. Barreto, E. Coelho, V. Farias, J. de Oliveira, L. de Freitas, and J. Vieira, “A quasi-resonant quadratic boost converter using a single resonant network”, IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 552-557, 2005.
[11] B. R. Lin and H. H. Lu, “Single-phase three-level PWM rectifier”, in Proc. IEEE APEC, pp. 63-68, 1999.
[12] C. L. Wei and M. H. Shih, “Design of a switched -capacitor DC-DC converter with a wide input voltage range”, IEEE Trans. Circuits Syst., vol. 60, no. 6, pp. 1648-1656, 2013.
[13] K. C. Tseng and C. C. Huang, “High step-up high-efficiency interleaved converter with voltage multiplier module for renewable energy system”, IEEE Trans. Ind. Electron., vol. 61, no. 3, pp. 1311-1319, 2013.
[14] Y. Tang, T. Wang and D. Fu, “Multicell switched-inductor/switched-capacitor combined active-network converters”, IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2063-2072, 2015.
[15] O. Kirshenboim and M. M. Peretz, “High-efficiency nonisolated converter with very high step-down conversion ratio”, IEEE Trans. Power Electron., vol. 32, no. 5, pp. 3683-3690, 2017.
[16] S. Hou, J. Chen, T. Sun and X. Bi, “Multi-input step-up converters based on the switched-diode-capacitor voltage accumulator”, IEEE Trans. Power Electron., vol. 31, no. 1, pp. 381-393, 2016.
[17] G. Wu, X. Ruan and Z. Ye, “Nonisolated high step-up DC–DC converters adopting switched-capacitor cell”, IEEE Trans. Ind. Electron., vol. 62, no. 1, pp. 383-393, 2015.
[18] H. K. Liao, T. J. Liang, L. S. Yang and J. F. Chen, “Non-inverting buck–boost converter with interleaved technique for fuel-cell system”, IET Power Electron., vol. 5, no. 8, pp. 1379-1388, 2012.
[19] K. Hwu and T. Peng, “A Novel buck–boost converter combining KY and buck converters”, IEEE Trans. Power Electron., vol. 27, no. 5, pp. 2236-2241, 2012.
[20] S. Miao, F. Wang and X. Ma, “A new transformerless buck–boost converter with positive output voltage”, IEEE Trans. Ind. Electron., vol. 63, no. 5, pp. 2965-2975, 2016.
[21] K. I. Hwu and W. Z. Jiang, “Analysis, design and derivation of a two-phase converter”, IET Power Electron., vol. 8, no. 10, pp. 1987-1995, 2015.
[22] C. T. Pan, C. F. Chuang and C. C. Chu, “A novel transformerless interleaved high step-down conversion ratio DC–DC converter with low switch voltage stress”, IEEE Trans. Ind. Electron., vol. 61, no. 10, pp. 5290-5299, 2014.
[23] A. Andrade, L. Schuch and M. Martins, “Very high voltage step-up Integrated Quadratic-Boost-Zeta converter”, in Proc. IEEE 24th Int. Symp. Ind. Electron. (ISIE), pp. 422-427, 2015.
[24] H. Y. Lee, T. J. Liang, J. F. Chen and K. H. Chen, “Design and implementation of a bidirectional SEPIC-Zeta DC-DC Converter”, in Proc. IEEE Int. Symp. Circuits Syst. (ISCAS), pp. 101-104, 2014.
[25] L. Yang, T. Liang and J. Chen, “Transformerless DC–DC converters with high step-up voltage gain”, IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3144-3152, 2009.
[26] E. Salari, M. R. Banaei and A. Ajami, “Analysis of switched inductor three-level DC/DC converter”, J. Oper. Autom. Power Eng., vol. 6, no.1, pp. 126-134, 2018.
[27] E. Babaei, M. Baruji, H. Mashinchi Maheri, and A. Abbasnezhad, “A developed structure of step-up DC/DC converter by using coupled inductor and active clamped circuit”, J. Oper. Autom. Power Eng., vol. 5, no.1, pp. 31-42, 2017.
[28] M. A. Salvador, T. B. Lazzarin and R. F. Coelho, “High Step-Up DC–DC Converter with Active Switched-Inductor and Passive Switched-Capacitor Networks”, IEEE Trans. Ind. Electrons., vol. 65, no. 7, pp. 5644-5654, 2018.
[29] J. Caro, J. Resendiz, J. Maldonado, A. Reyes and A. Gonzalez, “Quadratic buck-boost converter with positive output voltage and minimum ripple point design”, IET Power Electron., vol. 11, no. 7, pp. 1306-1313, 2018.
[30] A. Rajaei, R. Khazan, M. Mahmoudian, M. Mardaneh and M. Gitizadeh, “A Dual Inductor High Step-Up DC/DC Converter Based on the Cockcroft-Walton Multiplier”, IEEE Trans. Power Electron., vol. 33, no. 11, pp. 9699-9709, 2018.
[31] Y. Chen, Z. Lu and R. Liang, “Analysis and Design of a Novel High-Step-Up DC/DC Converter With Coupled Inductors”, IEEE Trans. Power Electron., vol. 33, no. 1, pp. 425-436, 2018.
[32] J. Ai and M. Lin, “High step-up DC–DC converter with low power device voltage stress for a distributed generation system”, IET Power Electron., vol. 11, no. 12, pp. 1955-1963, 2018.
[33] V. Pires, D. Foito, A. Cordeiro and J. Silva, “A single-switch DC/DC buck-boost converter with extended output voltage”, 2018 7th Int. Conf. Renewable Energy Res. Appl. (ICRERA), pp. 791-796, Paris, France, 2018.
[34] M. R. Banaei and H. A. F. Bonab, “A nonisolated transformerless high voltage gain buck boost dc-dc converter”, Modares J. Electr. Eng., vol. 15, no. 3, pp. 9-19, 2015.
[35] M. R. Banaei and H. A. F. Bonab, “High Efficiency Transformerless Buck Boost DC-DC Converter”, Int. J. Circ. Theor. Appl., vol. 45, no. 8, pp. 1129-1150, 2017.
[36] H. A. F. Bonab and M. R. Banaei, “A Novel High Step-Up DC-DC Converter Based on KY Converter”, JEEE J., vol. 10, no. 1, pp. 5-10, 2016.
[37] M. R. Banaei, H. A. F. Bonab, “A novel structure for single-switch nonisolated transformerless buck–boost DC–DC converter”, IEEE Trans. Ind. Electron., vol. 64, no. 1, pp. 198-205, 2017.
)
