F. Sedaghati; S. Ebrahimzadeh; H. Dolati; H. Shayeghi
Abstract
Switched capacitor multilevel inverters with low input DC voltage sources and voltage boost capability are very attractive to producing a high voltage levels in the output. The paper introduces a modified switched capacitor multilevel inverter with voltage boost capability. The suggested topology can ...
Read More
Switched capacitor multilevel inverters with low input DC voltage sources and voltage boost capability are very attractive to producing a high voltage levels in the output. The paper introduces a modified switched capacitor multilevel inverter with voltage boost capability. The suggested topology can be extended into symmetric and asymmetric configurations. Nearest-level modulation method is employed to generate high-quality output waveforms. The presented multilevel inverter is compared with the similar configurations by considering various criteria. Finally, to confirm the operation of the suggested topology, a laboratory scale of the suggested inverter is implemented and the results are given.
T. Qanbari; B. Tousi; M. Farhadi-Kangarlu
Abstract
The conventional space vector pulse-width modulation (SVPWM) for cascaded H-bridge inverters (CHBIs) has problems of computational complexity and memory requirements. Operation in overmodulation mode is the other reason for the complexity in SVPWM. This paper proposes a novel modulation method, named ...
Read More
The conventional space vector pulse-width modulation (SVPWM) for cascaded H-bridge inverters (CHBIs) has problems of computational complexity and memory requirements. Operation in overmodulation mode is the other reason for the complexity in SVPWM. This paper proposes a novel modulation method, named as level vector pulse-width modulation (LVPWM), for voltage control of CHBIs. The concept of the proposed method is similar to the SVPWM but with different vector diagram and dwell times calculations. Unlike the SVPWM, the α and β axes and also their variables are considered separately without gathering in complex variables. The vector diagram has two separated α and β axes each of which contains individual switching vectors and reference vectors. The selection of the vectors to synthesize the reference vectors depends only on the amplitudes of the reference vectors. The computational overhead and memory requirement are independent of the number of cascaded H-bridges. Lower computational overhead and easy and continuous extension to overmodulation region are the advantages of the proposed method compared with the SVPWM-based methods. Moreover, the switching algorithm achieves improved efficiency for the inverter. Simulation and experimental results verify the effectiveness of the proposed algorithm.
Power Electronic
R. Esmaeilzadeh; A. Ajami; M. R. Banaei
Abstract
This paper proposes a new two-stage inverter based on transformer-less high gain DC-DC converter for energy conversion of a photovoltaic system. The designed system consists of a high gain DC-DC converter cascaded with a three-phase inverter. The proposed DC-DC converter has a simple structure, and it ...
Read More
This paper proposes a new two-stage inverter based on transformer-less high gain DC-DC converter for energy conversion of a photovoltaic system. The designed system consists of a high gain DC-DC converter cascaded with a three-phase inverter. The proposed DC-DC converter has a simple structure, and it has one switch in its structure. The output voltage of the DC-DC converter supplies DC source for the inverter part of the multi-stage inverter. The advanced two-stage inverter sample was fabricated, then the findings of the acquired simulation and hardware warranted the configuration applicability. Finally, the MATLAB/SIMULINK is employed for the simulation of PV-battery system. The obtained results revel that the proposed power conversion system effectively chases the load and generation fluctuations and also properly handles the power mismatches in PV-battery system.
Power Electronic
Mohammadreza Banaei
Volume 4, Issue 1 , June 2016, , Pages 42-53
Abstract
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter ...
Read More
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC converter has low ripple and voltage of semiconductors is lower than the output voltage. The three-phase inverter is a T-type inverter. This inverter requires two balance DC sources. The inverter part converts the two output voltage sources of DC-DC power converter into a five-level line to line AC voltage. Simulation results are given to show the overall system performance, including AC voltage generation. A prototype is developed and tested to verify the performance of the converter.
Power Electronic
Mohammad Farhadi Kangarlu; Ebrahim Babaei; Frede Blaabjerg
Volume 4, Issue 1 , June 2016, , Pages 54-65
Abstract
Integration of the PV into the electrical grid needs power electronic interface. This power electronic interface should have some key features and should come up with grid codes. One of the important criteria is the quality and harmonic contents of the current being injected to the grid. High-order harmonics ...
Read More
Integration of the PV into the electrical grid needs power electronic interface. This power electronic interface should have some key features and should come up with grid codes. One of the important criteria is the quality and harmonic contents of the current being injected to the grid. High-order harmonics of the grid current should be very limited (lower than 0.3% of the fundamental current). Beside the topology of the power electronic interface, the output filter also affects the quality of the grid current. In this paper, a 5-level inverter is presented for grid integration of PV systems along with its output LCL filter design. Analytical calculation of losses for the 5-level inverter and the output LCL filter is presented. It is also compared to the H-bridge inverter in terms of output voltage and current harmonics, and the overall losses. Second-order generalized integral phase locked loop is used to synchronize the system with the grid voltage and the proportional resonant (PR) with harmonic compensation control method is used to control the output current. The proposed system has been simulated in the PSCAD/EMTDC environment to verify its operation and control.
