Power System Stability
M. Mohammadniaei; F. Namdari; M.R. Shahkarami
Abstract
Voltage stability is one of the most important factors in maintaining reliable operation of power systems. When a disturbance occurs in the power system, it usually causes instabilities and sometimes leads to voltage collapse (VC). To avoid such problems, a novel approach called Vector Analysis (VA) ...
Read More
Voltage stability is one of the most important factors in maintaining reliable operation of power systems. When a disturbance occurs in the power system, it usually causes instabilities and sometimes leads to voltage collapse (VC). To avoid such problems, a novel approach called Vector Analysis (VA) is proposed that exploits a new instability detection index to provide wide area voltage stability for the power systems. The presented index is calculated based on measuring the active and reactive powers that flow through the bus which is connected to the generator bus. Moreover, when the proposed VA approach predicts VC, through disconnecting weak lines and based on network graph, zoning is carried out in the power system. After zoning, damaged and undamaged zones will be differentiated and damaged zones requires load shedding (LS) which is accomplished using ANFIS-TSK (AN-T) intelligent method. The presented approach is applied to the IEEE-39 bus test system. The obtained simulation results demonstrate acceptable performance of the presented approach compared with other suggested methods in terms of speed and accuracy.
Power System Stability
M. Kazeminejad; M. Banejad; U. Annakkage; N. Hosseinzadeh
Abstract
Static voltage stability is considered as one of the main issues for primary identification before voltage collapsing in distribution systems. Although, the optimum siting of distributed generation resources in distribution electricity network can play a significant role in voltage stability improving ...
Read More
Static voltage stability is considered as one of the main issues for primary identification before voltage collapsing in distribution systems. Although, the optimum siting of distributed generation resources in distribution electricity network can play a significant role in voltage stability improving and losses reduction, the high penetration level of them can lead to reduction in the improvement of load-ability. Moreover, the rapid variation and types of loads in distribution networks will have a significant impact on the maximum load-ability across the whole system. In this paper, a modified voltage stability index is presented with regard to distributed generation units (DG) along with two-tier load model. By applying the Imperialist Competition Algorithm (ICA), the best size of DG with corresponding of DG placement is used to improve the voltage stability and reducing the losses. It is shown in the paper that the DG penetration level can have influence on load-ability of the system and also the voltage regulators performance. The simulation results on the standard IEEE-13 Bus test feeder illustrate the precision of studies method and the load-ability limits in the system, taking into account the high penetration level of distributed generation units.
